Specifications

  • Mfr Part Number: SPI150FA
  • Features:
    • Complied with Flex ATX and ATX12V standard
    • Active Power Factor Correction (PFC) meet EN61000-3-2
    • High efficiency and reliability
    • Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances)
    • Remote ON/OFF function
    • Internal 12V DC fan included
    • Low noise and ripple
    • Output over voltage short circuit and over current protection
    • 100% Hi-pot ATE and burn-in tested
    • Re-settable power shut down
    • Complies with FCC part 15 subpart J class B 115Vac operation and CISPR 22 class B at 230Vac operation
    • Approved by UL/CUL 60950-1NEMKO EN60950-1 (CB Report) CE FCCEMC report
  • Input:
    • Input Range: 90 ~ 264Vac (RMS) Full Range Input
    • Frequency: 47 ~ 63Hz
    • Input Current: Max 4A (RMS) @ 115Vac 2A (RMS) @ 230Vac
    • Inrush Current: No damage
  • Output:
    • Total Watts: 150W
    • Output Voltage: +3.3V @ 10A +5V @ 13A +12V1 @ 10A -12V @ 0.5A -5Vsb @ 2.0A
    • +3.3V and +5V total output not exceed 85W
  • Dielectric Withstand: Primary to Frame Ground 1800V AC for 1 second
  • Efficiency: 68% Minimum
  • Rise Time: Less than 20ms
  • Hold-up Time: 17ms minimum at nominal input voltage
  • Power Good Signal: Power on delay time 100 ~ 500ms off delay 1ms minimum (TTL and CMOS compatible)
  • Leakage Current: Less than 3.5mA at 264Vac 50Hz
  • MTBF: 100000 hours on maximum load at +25 C
  • Dimen

  • 0677808611235
  • Sparkle